| Author |
Message |
Guest
|
 Posted:
Mon Apr 25, 2005 6:27 pm Post subject:
LPD on JetDirect J3113A |
|
|
Can the HP JetDirect J3113A interface be configured as a Line Printer
Daemon using port 515? If so, how? |
|
| Back to top |
|
 |
Warren Block
Guest
|
| Posted:
Mon Apr 25, 2005 7:36 pm Post subject:
Re: LPD on JetDirect J3113A |
|
|
bforward@texarkanacollege.edu <bforward@texarkanacollege.edu> wrote:
| Quote: | Can the HP JetDirect J3113A interface be configured as a Line Printer
Daemon using port 515?
|
Yes. (Future reference: that's a JetDirect 600N.)
LPD should be enabled by default. If it's been turned off, you can use
a web browser to get to the JetDirect's configuration pages. Under
Networking, Configuration, Other Settings, make sure LPD Printing is
checked, then click Apply.
Or just telnet to it and type
lpd:1
exit
and save settings.
--
Warren Block * Rapid City, South Dakota * USA |
|
| Back to top |
|
|
Guest
|
| Posted:
Mon Apr 25, 2005 8:58 pm Post subject:
Re: LPD on JetDirect J3113A |
|
|
Yes. We flashed the latest firmware and we used the JetAdmin Web
interface but saw that the LPD PRINTING box was greyed out and can't
seem to get it to appear so it can be checked on. We figured LPD was
not an option on this JetDirect card. Using Telnet, the command LPD:1
returns "Illegal Entry." |
|
| Back to top |
|
|
Marek Williams
Guest
|
| Posted:
Wed Apr 27, 2005 9:13 pm Post subject:
Re: LPD on JetDirect J3113A |
|
|
On 25 Apr 2005 08:58:30 -0700, bforward@texarkanacollege.edu dijo:
| Quote: | Yes. We flashed the latest firmware and we used the JetAdmin Web
interface but saw that the LPD PRINTING box was greyed out and can't
seem to get it to appear so it can be checked on. We figured LPD was
not an option on this JetDirect card. Using Telnet, the command LPD:1
returns "Illegal Entry."
|
Is the printer turned on when you try this?
I think you can also do it from the printer's control panel.
--
Bogus e-mail address, but I read this newsgroup regularly, so reply here. |
|
| Back to top |
|
|
Fred McKenzie
Guest
|
| Posted:
Thu Apr 28, 2005 11:11 pm Post subject:
Re: LPD on JetDirect J3113A |
|
|
In article <1114444710.729112.65640@o13g2000cwo.googlegroups.com>,
bforward@texarkanacollege.edu wrote:
| Quote: | Yes. We flashed the latest firmware and we used the JetAdmin Web
interface but saw that the LPD PRINTING box was greyed out and can't
seem to get it to appear so it can be checked on. We figured LPD was
not an option on this JetDirect card. Using Telnet, the command LPD:1
returns "Illegal Entry."
|
BF-
Sometimes an entry is grayed-out when you don't have permission to change
it. Either you need to log-in with an admistrative password, or/and there
is a different screen where the change can be made.
If the printer/JetDirect has an IP address, I don't see why you can't
print to that address using LPD printing via the default port.
Fred |
|
| Back to top |
|
|
Guest
|
| Posted:
Sat Apr 30, 2005 1:58 am Post subject:
Re: LPD on JetDirect J3113A |
|
|
Well...now we think the printer DOES operate as a LPD whether or not
the box is greyed out in the network configuration. We found the source
application was sending fragmented data packets. Apparently, the
printer didn't know how to handle this and was ignoring them. The
sending application kept on sending fragmented packets until the
printer simply timed out. We are now addressing the problem with the
sending application.
Thanks for all your suggestions. |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in