| Author |
Message |
Casey Smith
Guest
|
 Posted:
Wed Dec 15, 2004 11:00 pm Post subject:
Vuescan Raw Infrared Clean w/ FS4000 problem |
|
|
Hello,
Recently purchased Vuescan with the hopes of using the raw
file feature to scan and arcive family slides and then batch process
them to color correct, remove dust/scratches, etc.... I'm using
Vuescan 8.1.14 on Mac OSX 10.3.6 with a Canoscan FS4000 via USB.
Scaning to the raw file works great but when I try to go back and
scan from file to apply infrared clean, etc, the infrared cleaning
option doesn't show up under the filters tab as it does during the
original scan. After looking at the newsgroup I've tried seting the
Input to 64bit RGBI as well as seting the Raw Filetype to RGBI during
the original scan. Nothing seems to help.
Any help or advice would be greatly appreciated... is this simply
not a supported feature for the FS4000? I looked in the release notes
and don't see any specific mention.
Thanks for your time,
Casey Smith
-- |
|
| Back to top |
|
 |
Erik Krause
Guest
|
| Posted:
Fri Dec 17, 2004 12:59 am Post subject:
Re: Vuescan Raw Infrared Clean w/ FS4000 problem |
|
|
Casey Smith <kz-news@tinyzero.com> wrote:
| Quote: | Scaning to the raw file works great but when I try to go back and
scan from file to apply infrared clean, etc, the infrared cleaning
option doesn't show up under the filters tab as it does during the
original scan. After looking at the newsgroup I've tried seting the
Input to 64bit RGBI as well as seting the Raw Filetype to RGBI during
the original scan. Nothing seems to help.
|
Do you use Raw output with Scan or with Save (output tab)? If you
output with Save and you have infrared cleaning on while scanning the
Raw file is already cleaned and the IR channel is therefor not written.
--
Erik Krause
Digital contrast problems: http://www.erik-krause.de/contrast |
|
| Back to top |
|
|
Casey Smith
Guest
|
| Posted:
Fri Dec 17, 2004 2:20 am Post subject:
Re: Vuescan Raw Infrared Clean w/ FS4000 problem |
|
|
In article <MPG.1c2c077e38d6c3e198a73a@ID-18456.user.uni-berlin.de>,
Erik Krause <erik.krause@gmx.de> wrote:
| Quote: | Casey Smith <kz-news@tinyzero.com> wrote:
Scaning to the raw file works great but when I try to go back and
scan from file to apply infrared clean, etc, the infrared cleaning
option doesn't show up under the filters tab as it does during the
original scan. After looking at the newsgroup I've tried seting the
Input to 64bit RGBI as well as seting the Raw Filetype to RGBI during
the original scan. Nothing seems to help.
Do you use Raw output with Scan or with Save (output tab)? If you
output with Save and you have infrared cleaning on while scanning the
Raw file is already cleaned and the IR channel is therefor not written.
|
Erik, thanks for responding... I'm outputing Raw with Scan. I can open
the resulting Tiff with photoshop and see the IR channel. Everything
looks good inside the file... I'm not having any of the alignment
problems with the IR channel as some have reported. Just don't get the
IR clean option in the Filters Tab when I try to scan from file. Any
ideas? Know where I can get an older version of Vuescan to see if this
is a new problem?
Thanks,
Casey |
|
| Back to top |
|
|
Erik Krause
Guest
|
| Posted:
Fri Dec 17, 2004 5:42 pm Post subject:
Re: Vuescan Raw Infrared Clean w/ FS4000 problem |
|
|
Casey Smith <kz-news@tinyzero.com> wrote:
| Quote: | I'm outputing Raw with Scan. I can open
the resulting Tiff with photoshop and see the IR channel. Everything
looks good inside the file... I'm not having any of the alignment
problems with the IR channel as some have reported. Just don't get the
IR clean option in the Filters Tab when I try to scan from file.
|
In this case you should submit a problem report to Ed using the
procedure described on http://www.hamrick.com/sup.html
--
Erik Krause
Digital contrast problems: http://www.erik-krause.de/contrast |
|
| Back to top |
|
|
Casey Smith
Guest
|
| Posted:
Mon Dec 20, 2004 8:28 pm Post subject:
Re: Vuescan Raw Infrared Clean w/ FS4000 problem |
|
|
I sent Ed a problem report and he fixed this problem in 8.1.16
Thanks,
Casey
In article <MPG.1c2cf27929678ac198a740@ID-18456.user.uni-berlin.de>,
Erik Krause <erik.krause@gmx.de> wrote:
| Quote: | Casey Smith <kz-news@tinyzero.com> wrote:
I'm outputing Raw with Scan. I can open
the resulting Tiff with photoshop and see the IR channel. Everything
looks good inside the file... I'm not having any of the alignment
problems with the IR channel as some have reported. Just don't get the
IR clean option in the Filters Tab when I try to scan from file.
In this case you should submit a problem report to Ed using the
procedure described on http://www.hamrick.com/sup.html |
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in