| Author |
Message |
Bill Helbron
Guest
|
 Posted:
Tue Dec 07, 2004 10:04 pm Post subject:
Problem with Visioneer 8100 Scanner |
|
|
Following a bad sector problem with my HD, the HD had to be replaced but most of
the files were recovered. However, I am now unable to get my Visioneer 8100
scanner to operate (on a USB port). In the Control Panel>System>Device Manager,
the Visioneer 8100 OneTouch shows up under Imaging Devices, but there is a "?"
over the icon. When I highlight and click on "Properties", I get the message
"The NTKERN.VXD device loader(s) for this device could not load the device
driver. (Code 2). To fix this, click Update Driver to update the device driver."
It appears that no matter what CD I insert (Visioneer OneTouch 8100 Scanner,
Paperport Delux 7.0, or Windows 98), the proper file cannot be found. Any
suggestions would be greatly appreciated!
Bill |
|
| Back to top |
|
 |
CSM1
Guest
|
| Posted:
Tue Dec 07, 2004 11:54 pm Post subject:
Re: Problem with Visioneer 8100 Scanner |
|
|
"Bill Helbron" <jw.helbron@verizon.net> wrote in message
news:nqnbr09ahh05d8hktjmqov8fj4okq3be77@4ax.com...
| Quote: | Following a bad sector problem with my HD, the HD had to be replaced but
most of
the files were recovered. However, I am now unable to get my Visioneer
8100
scanner to operate (on a USB port). In the Control Panel>System>Device
Manager,
the Visioneer 8100 OneTouch shows up under Imaging Devices, but there is a
"?"
over the icon. When I highlight and click on "Properties", I get the
message
"The NTKERN.VXD device loader(s) for this device could not load the device
driver. (Code 2). To fix this, click Update Driver to update the device
driver."
It appears that no matter what CD I insert (Visioneer OneTouch 8100
Scanner,
Paperport Delux 7.0, or Windows 98), the proper file cannot be found. Any
suggestions would be greatly appreciated!
Bill
|
The failed HD screwed up all of the scanner files. Install new software.
Remove the current install. Reboot. Install a new Visioneer driver.
Reinstall PaperPort, Select TWAIN.
--
CSM1
http://www.carlmcmillan.com
-- |
|
| Back to top |
|
|
Bill Helbron
Guest
|
| Posted:
Wed Dec 08, 2004 5:29 am Post subject:
Re: Problem with Visioneer 8100 Scanner |
|
|
Thanks for your reply! I took your suggestions only to find out, after going
through the re-installation process and still having problems, discovered that
my 8100.exe file was an older version that apparently didn't get salvaged. I
downloaded the latest version from Visioneer's website, and now it performs
perfectly.
Bill
On Tue, 07 Dec 2004 18:54:12 GMT, "CSM1" <nomoremail@nomail.com> wrote:
| Quote: |
"Bill Helbron" <jw.helbron@verizon.net> wrote in message
news:nqnbr09ahh05d8hktjmqov8fj4okq3be77@4ax.com...
Following a bad sector problem with my HD, the HD had to be replaced but
most of
the files were recovered. However, I am now unable to get my Visioneer
8100
scanner to operate (on a USB port). In the Control Panel>System>Device
Manager,
the Visioneer 8100 OneTouch shows up under Imaging Devices, but there is a
"?"
over the icon. When I highlight and click on "Properties", I get the
message
"The NTKERN.VXD device loader(s) for this device could not load the device
driver. (Code 2). To fix this, click Update Driver to update the device
driver."
It appears that no matter what CD I insert (Visioneer OneTouch 8100
Scanner,
Paperport Delux 7.0, or Windows 98), the proper file cannot be found. Any
suggestions would be greatly appreciated!
Bill
The failed HD screwed up all of the scanner files. Install new software.
Remove the current install. Reboot. Install a new Visioneer driver.
Reinstall PaperPort, Select TWAIN.
--
CSM1
http://www.carlmcmillan.com |
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in