Alan
Guest
|
 Posted:
Tue Dec 21, 2004 6:00 pm Post subject:
Re: Xerox Workcentre Pro 35 pcl codes |
|
|
On Fri, 17 Dec 2004 18:10:15 +0100, <nospam@nospam.nl> wrote:
| Quote: | Does anyone have the PCL codes for all trays of the
Xerox Workcentre Pro 35? I need to print simple dos
documents to specific trays.
|
A PCL5 reference gives this:
The Output Bin Selection command selects either of the two output
paper bins (upper or lower [rear]) for paper output.
<esc>&l#G
# = 1 - Upper Output Bin
2 - Lower (Rear) Output Bin
Default = Upper Output Bin
Range = 1, 2
So try this, and if you have more than two trays, just see what
happens with # = 3, 4, etc.
Also you might try the PJL command OUTBIN:
OUTBIN Sets the default output bin.
values: UPPER, LOWER,
OPTIONALOUTPUTBIN1, . . .OPTIONALOUTPUTBIN62
PJL commands go before and after the PCL of the actual page. Most
printers that support PCL5 or above can use PJL. |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in
