| Author |
Message |
Jeff Ingram
Guest
|
 Posted:
Fri Nov 11, 2005 8:26 am Post subject:
No audio when connecting 9800 All-in-Wonder Pro to DirectTV |
|
|
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up ATI's
TV app or any video capturing application I have installed. (Pinnacle Studio
9, Window Movie Maker, DVD Movie Factory) I get a picture after I change to
channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Thanks,
Jeff |
|
| Back to top |
|
 |
DDC
Guest
|
| Posted:
Fri Nov 11, 2005 8:26 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
On Fri, 11 Nov 2005 00:00:22 -0500, "Jeff Ingram"
<ingramje29@yahoo.com> wrote:
| Quote: | Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up ATI's
TV app or any video capturing application I have installed. (Pinnacle Studio
9, Window Movie Maker, DVD Movie Factory) I get a picture after I change to
channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Thanks,
Jeff
|
I think you may need some connector connected to your audio sound card
or motherboard.
You may need a cable with a jack "male"connector.that is what i've
been told by the vendor at some electronic shop. that was for video
recording to my pc. |
|
| Back to top |
|
|
J. Clarke
Guest
|
| Posted:
Fri Nov 11, 2005 5:32 pm Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
Jeff Ingram wrote:
| Quote: | Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
|
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that board?
And are you _sure_? It's easy to get confused with ATI's cabling.
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net) |
|
| Back to top |
|
|
T Shadow
Guest
|
| Posted:
Fri Nov 11, 2005 11:28 pm Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
| Quote: | Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
If he's using MMC 9.03(IIRC) or newer the audio is digital through the PCI |
bus. Audio is thru Wave not hardware. If the sound card is an Audigy he
needs to look at the MMC Release Notes.
Might be a good idea to make sure the receiver is putting out audio. Audio
on the RF output on my cable box is mono only. If you use S-Video you'll get
a better picture. |
|
| Back to top |
|
|
Jeff Ingram
Guest
|
| Posted:
Sat Nov 12, 2005 2:08 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
What audio out? I don't see an audio out on my 9800Pro All in Wonder on the
outside. Might there be a connector on the the face of the card itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I get
audio when I connect that to my VCR.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
| Quote: | Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net) |
|
|
| Back to top |
|
|
Jeff Ingram
Guest
|
| Posted:
Sat Nov 12, 2005 2:12 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
My receiver is at least 30 feet away from my computer, therefore I have to
use a coaxial cable. Unless they make 30+ft S-Video cables.
Thanks,
Jeff
"T Shadow" <knone@zilch.com.invalid> wrote in message
news:tx4df.94814$Hs.24416@tornado.ohiordc.rr.com...
| Quote: | "J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the
Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
If he's using MMC 9.03(IIRC) or newer the audio is digital through the PCI
bus. Audio is thru Wave not hardware. If the sound card is an Audigy he
needs to look at the MMC Release Notes.
Might be a good idea to make sure the receiver is putting out audio. Audio
on the RF output on my cable box is mono only. If you use S-Video you'll
get
a better picture.
|
|
|
| Back to top |
|
|
T Shadow
Guest
|
| Posted:
Sat Nov 12, 2005 4:04 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
"Jeff Ingram" <ingramje29@yahoo.com> wrote in message
news:dl2tuq$dtej$1@news3.infoave.net...
| Quote: | My receiver is at least 30 feet away from my computer, therefore I have to
use a coaxial cable. Unless they make 30+ft S-Video cables.
Thanks,
Jeff
"T Shadow" <knone@zilch.com.invalid> wrote in message
news:tx4df.94814$Hs.24416@tornado.ohiordc.rr.com...
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring
up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the
Windows
Volume
Control applet? I've upped all the sliders to the max on the
Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
If he's using MMC 9.03(IIRC) or newer the audio is digital through the
PCI
bus. Audio is thru Wave not hardware. If the sound card is an Audigy he
needs to look at the MMC Release Notes.
Might be a good idea to make sure the receiver is putting out audio.
Audio
on the RF output on my cable box is mono only. If you use S-Video you'll
get
a better picture.
25ft are common but going further may require an amplifier. only you can |
decide if it's worth the time/money. |
|
| Back to top |
|
|
Ron Marraccini
Guest
|
| Posted:
Sat Nov 12, 2005 4:25 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
I also connect the RF out of my satellite receiver to the RF in on the AIW
9800 Pro card.
As the newer ATI software (MMC 9.08) sends the audio signal on to the
motherboard bus, I use the spdif audio out on my Abit NF7-S motherboard (go
Soundstorm!) and run it to my 5.1 home theater receiver. The Soundstorm chip
on the motherboard automatically encodes/decodes Dolby Digital.
Make sure the ATI software is set to digital out.
--
Ron A. Marraccini
"Jeff Ingram" <ingramje29@yahoo.com> wrote in message
news:dl2tol$dt9k$1@news3.infoave.net...
| Quote: | What audio out? I don't see an audio out on my 9800Pro All in Wonder on
the
outside. Might there be a connector on the the face of the card itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I get
audio when I connect that to my VCR.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
|
|
|
| Back to top |
|
|
Jeff Ingram
Guest
|
| Posted:
Sat Nov 12, 2005 6:21 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
So I can assume that you're getting audio in via the coaxial connection?
If true, what did you have to enable to get that?
Thanks,
Jeff
"Ron Marraccini" <ronm@ramlegal.com> wrote in message
news:gT8df.15$KC1.690@news.uswest.net...
| Quote: | I also connect the RF out of my satellite receiver to the RF in on the AIW
9800 Pro card.
As the newer ATI software (MMC 9.08) sends the audio signal on to the
motherboard bus, I use the spdif audio out on my Abit NF7-S motherboard
(go
Soundstorm!) and run it to my 5.1 home theater receiver. The Soundstorm
chip
on the motherboard automatically encodes/decodes Dolby Digital.
Make sure the ATI software is set to digital out.
--
Ron A. Marraccini
"Jeff Ingram" <ingramje29@yahoo.com> wrote in message
news:dl2tol$dt9k$1@news3.infoave.net...
What audio out? I don't see an audio out on my 9800Pro All in Wonder on
the
outside. Might there be a connector on the the face of the card
itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I
get
audio when I connect that to my VCR.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring
up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the
Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
|
|
|
| Back to top |
|
|
J. Clarke
Guest
|
| Posted:
Sat Nov 12, 2005 8:26 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
Jeff Ingram wrote:
| Quote: | So I can assume that you're getting audio in via the coaxial connection?
If true, what did you have to enable to get that?
|
Audio comes into the board as part of the TV signal on the coaxial
connection. It's getting it _out_ of the board that is the issue.
| Quote: | Thanks,
Jeff
"Ron Marraccini" <ronm@ramlegal.com> wrote in message
news:gT8df.15$KC1.690@news.uswest.net...
I also connect the RF out of my satellite receiver to the RF in on the
AIW 9800 Pro card.
As the newer ATI software (MMC 9.08) sends the audio signal on to the
motherboard bus, I use the spdif audio out on my Abit NF7-S motherboard
(go
Soundstorm!) and run it to my 5.1 home theater receiver. The Soundstorm
chip
on the motherboard automatically encodes/decodes Dolby Digital.
Make sure the ATI software is set to digital out.
--
Ron A. Marraccini
"Jeff Ingram" <ingramje29@yahoo.com> wrote in message
news:dl2tol$dt9k$1@news3.infoave.net...
What audio out? I don't see an audio out on my 9800Pro All in Wonder
on the
outside. Might there be a connector on the the face of the card
itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I
get
audio when I connect that to my VCR.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring
up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the
Windows Volume
Control applet? I've upped all the sliders to the max on the
Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
|
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net) |
|
| Back to top |
|
|
J. Clarke
Guest
|
| Posted:
Sat Nov 12, 2005 8:26 am Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
Jeff Ingram wrote:
| Quote: | What audio out? I don't see an audio out on my 9800Pro All in Wonder on
the
outside. Might there be a connector on the the face of the card itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I get
audio when I connect that to my VCR.
|
Look on page 21 of the manual and it will show you how the connection goes.
It's on the AV Out cable.
| Quote: | Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
|
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net) |
|
| Back to top |
|
|
Jeff Ingram
Guest
|
| Posted:
Sun Nov 13, 2005 8:18 pm Post subject:
Re: No audio when connecting 9800 All-in-Wonder Pro to Direc |
|
|
Stranger yet is that if I connect the coaxial to an indoor amplified
antenna, I get audio. But not when I have it directly connected to my
satellite dish. I know I get audio out of the dish because when I connect
it to my VCR I have audio.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl43u811lue@news3.newsguy.com...
| Quote: | Jeff Ingram wrote:
What audio out? I don't see an audio out on my 9800Pro All in Wonder on
the
outside. Might there be a connector on the the face of the card
itsself?
BTW, I've using a coxial cable from my DirectTV receiver. And yes, I
get
audio when I connect that to my VCR.
Look on page 21 of the manual and it will show you how the connection
goes.
It's on the AV Out cable.
Thanks,
Jeff
"J. Clarke" <jclarke.usenet@snet.net.invalid> wrote in message
news:dl214g0tfb@news3.newsguy.com...
Jeff Ingram wrote:
Hello,
I've got my 9800Pro All-in-Wonder card connected to the out of my
DirectTV/Tivo sattelite receiver via a coaxial cable. When I bring
up
ATI's TV app or any video capturing application I have installed.
(Pinnacle Studio 9, Window Movie Maker, DVD Movie Factory) I get a
picture
after I change to channel 3, but I don't get any sound.
Is there a setting I'm missing somewhere? Could it be in the Windows
Volume
Control applet? I've upped all the sliders to the max on the
Recording
Volume Control, but still no sound.
What am I missing?
Do you have the audio out from the AIW connected to the line-in or
microphone-in or aux-in or CD-in or whatever ATI recommends for that
board?
And are you _sure_? It's easy to get confused with ATI's cabling.
Thanks,
Jeff
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net) |
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in