| Author |
Message |
99windstar
Guest
|
 Posted:
Fri Nov 11, 2005 4:51 am Post subject:
Blue Screen???? |
|
|
I have a Dell 8100 P4 1.7 with 256MB PC800 RDRAM that has been running fine.
I usually leave it running 24/7... today I went to use the computer and I
had the windows black screen you get when Windows wasn't shut down properly
(I didn't shut windows down) with the option to start in safe mode. I select
to start windows using the last known settings. As it was starting to go to
windows a blue screen flashed (too fast to see what it said) than went back
to the Windows black screen with the safe mode options. I can get into
Windows in safe mode but I don't have a clue what to look for as my problem.
I suspect that the blue screen that flashes up when I don't go into safe
mode (I don't see the blue screen when I select safe mode) gives some clue
as to what is wrong but it comes and goes too fast to read anything. How do
I troubleshoot in safe mode? What are some logical culprits? Memory? Drives?
I am a novice at this. I have just done basic things with my systems but
don't know where to start to troubleshoot this. BTW I did try system restore
but still have the problem. Any ideas?? Thanks!!!!!! |
|
| Back to top |
|
 |
Pen
Guest
|
| Posted:
Fri Nov 11, 2005 5:59 am Post subject:
Re: Blue Screen???? |
|
|
"99windstar" <nikkiekoalastop@verizon.net> wrote in message
news:T9Qcf.7206$vC6.2141@trnddc05...
| Quote: | I have a Dell 8100 P4 1.7 with 256MB PC800 RDRAM that has
been running fine.
I usually leave it running 24/7... today I went to use the
computer and I had the windows black screen you get when
Windows wasn't shut down properly (I didn't shut windows
down) with the option to start in safe mode. I select to
start windows using the last known settings. As it was
starting to go to windows a blue screen flashed (too fast
to see what it said) than went back to the Windows black
screen with the safe mode options. I can get into Windows
in safe mode but I don't have a clue what to look for as
my problem. I suspect that the blue screen that flashes up
when I don't go into safe mode (I don't see the blue
screen when I select safe mode) gives some clue as to what
is wrong but it comes and goes too fast to read anything.
How do I troubleshoot in safe mode? What are some logical
culprits? Memory? Drives? I am a novice at this. I have
just done basic things with my systems but don't know
where to start to troubleshoot this. BTW I did try system
restore but still have the problem. Any ideas??
Thanks!!!!!!
|
Start in safe mode and disable Auto Restart on Error.
Right click MyComputer select properties/advanced
Under Startup and Recivery click Settings
Under System Failure uncheck Automatically Restart
Now you see the error message
> |
|
| Back to top |
|
|
99windstar
Guest
|
| Posted:
Fri Nov 11, 2005 8:24 am Post subject:
Re: Blue Screen???? OKAY I got it now, now what? |
|
|
Thanks that let me see the error. The error I got was
"A problem has been detected and windows has been shut down to prevent
damage.
BAD_POOL_CALLER
If this is the 1st time you've seen this stop error message restart your
computer"......(it goes on)
Than it say "Check new hardware or software installation is properly
installed"....blah blah.....
It then had these codes at the bottom
**STOP: 0x000000C2 (0x00000007, 0x00000CD4, 0xE1E3D008, 0xE1C5E168
I have not installed any new hardware or softeware in ages on my machine. I
have full McAfee firewall and virus scan.
AND by the way now that I diabled the Autorestart for getting into safe mode
how do I now get into safe mode?
Thanks!!!
"Pen" <pen34usnospam@hotmailnospam.com> wrote in message
news:3NmdnXVKNtd3Q-7enZ2dnUVZ_v6dnZ2d@comcast.com...
| Quote: |
"99windstar" <nikkiekoalastop@verizon.net> wrote in message
news:T9Qcf.7206$vC6.2141@trnddc05...
I have a Dell 8100 P4 1.7 with 256MB PC800 RDRAM that has been running
fine.
I usually leave it running 24/7... today I went to use the computer and I
had the windows black screen you get when Windows wasn't shut down
properly (I didn't shut windows down) with the option to start in safe
mode. I select to start windows using the last known settings. As it was
starting to go to windows a blue screen flashed (too fast to see what it
said) than went back to the Windows black screen with the safe mode
options. I can get into Windows in safe mode but I don't have a clue what
to look for as my problem. I suspect that the blue screen that flashes up
when I don't go into safe mode (I don't see the blue screen when I select
safe mode) gives some clue as to what is wrong but it comes and goes too
fast to read anything. How do I troubleshoot in safe mode? What are some
logical culprits? Memory? Drives? I am a novice at this. I have just done
basic things with my systems but don't know where to start to
troubleshoot this. BTW I did try system restore but still have the
problem. Any ideas?? Thanks!!!!!!
Start in safe mode and disable Auto Restart on Error.
Right click MyComputer select properties/advanced
Under Startup and Recivery click Settings
Under System Failure uncheck Automatically Restart
Now you see the error message
|
|
|
| Back to top |
|
|
Grumps
Guest
|
| Posted:
Fri Nov 11, 2005 8:25 am Post subject:
Re: Blue Screen???? OKAY I got it now, now what? |
|
|
99windstar wrote:
| Quote: | "Pen" <pen34usnospam@hotmailnospam.com> wrote in message
news:3NmdnXVKNtd3Q-7enZ2dnUVZ_v6dnZ2d@comcast.com...
"99windstar" <nikkiekoalastop@verizon.net> wrote in message
news:T9Qcf.7206$vC6.2141@trnddc05...
I have a Dell 8100 P4 1.7 with 256MB PC800 RDRAM that has been
running fine.
I usually leave it running 24/7... today I went to use the computer
and I had the windows black screen you get when Windows wasn't shut
down properly (I didn't shut windows down) with the option to start
in safe mode. I select to start windows using the last known
settings. As it was starting to go to windows a blue screen flashed
(too fast to see what it said) than went back to the Windows black
screen with the safe mode options. I can get into Windows in safe
mode but I don't have a clue what to look for as my problem. I
suspect that the blue screen that flashes up when I don't go into
safe mode (I don't see the blue screen when I select safe mode)
gives some clue as to what is wrong but it comes and goes too fast
to read anything. How do I troubleshoot in safe mode? What are some
logical culprits? Memory? Drives? I am a novice at this. I have
just done basic things with my systems but don't know where to
start to troubleshoot this. BTW I did try system restore but still
have the problem. Any ideas?? Thanks!!!!!!
Start in safe mode and disable Auto Restart on Error.
Right click MyComputer select properties/advanced
Under Startup and Recivery click Settings
Under System Failure uncheck Automatically Restart
Now you see the error message
Thanks that let me see the error. The error I got was
"A problem has been detected and windows has been shut down to prevent
damage.
BAD_POOL_CALLER
|
Google for this phrase, select the first Microsoft link. Does that give any
clues? |
|
| Back to top |
|
|
Ian East
Guest
|
| Posted:
Fri Nov 11, 2005 8:25 am Post subject:
Re: Blue Screen???? OKAY I got it now, now what? |
|
|
On Fri, 11 Nov 2005 02:24:32 GMT, "99windstar"
<nikkiekoalastop@verizon.net> wrote:
| Quote: | Thanks that let me see the error. The error I got was
"A problem has been detected and windows has been shut down to prevent
damage.
BAD_POOL_CALLER
If this is the 1st time you've seen this stop error message restart your
computer"......(it goes on)
Than it say "Check new hardware or software installation is properly
installed"....blah blah.....
It then had these codes at the bottom
**STOP: 0x000000C2 (0x00000007, 0x00000CD4, 0xE1E3D008, 0xE1C5E168
I have not installed any new hardware or softeware in ages on my machine. I
have full McAfee firewall and virus scan.
AND by the way now that I diabled the Autorestart for getting into safe mode
how do I now get into safe mode?
Thanks!!!
|
Take a look at this thread.
http://kindel.com/blogs/charlie/archive/2004/05/26/282.aspx
BTW. To start in safe mode press F7 when Windows first starts to load
(i.e. right after POST) |
|
| Back to top |
|
|
99windstar
Guest
|
| Posted:
Fri Nov 11, 2005 10:58 pm Post subject:
Re: Blue Screen???? OKAY I got it now, now what? |
|
|
Thank you so much for your help!!! The link you sent is confirming something
I have been suspecting. Bad Memory.....I will
run the mem. tester to be sure and go from there. Thanks!
"Ian East" <ian.east@gmail> wrote in message
news:fmk8n1t4agquu7n9vd8d8t8kv11vdka81h@4ax.com...
| Quote: | On Fri, 11 Nov 2005 02:24:32 GMT, "99windstar"
nikkiekoalastop@verizon.net> wrote:
Thanks that let me see the error. The error I got was
"A problem has been detected and windows has been shut down to prevent
damage.
BAD_POOL_CALLER
If this is the 1st time you've seen this stop error message restart your
computer"......(it goes on)
Than it say "Check new hardware or software installation is properly
installed"....blah blah.....
It then had these codes at the bottom
**STOP: 0x000000C2 (0x00000007, 0x00000CD4, 0xE1E3D008, 0xE1C5E168
I have not installed any new hardware or softeware in ages on my machine.
I
have full McAfee firewall and virus scan.
AND by the way now that I diabled the Autorestart for getting into safe
mode
how do I now get into safe mode?
Thanks!!!
Take a look at this thread.
http://kindel.com/blogs/charlie/archive/2004/05/26/282.aspx
BTW. To start in safe mode press F7 when Windows first starts to load
(i.e. right after POST) |
|
|
| Back to top |
|
|
99windstar
Guest
|
| Posted:
Fri Nov 11, 2005 10:59 pm Post subject:
Re: Blue Screen???? OKAY I got it now, now what? |
|
|
I did google the phase just after I posted here. Came up with the KB on the
subject. After I test the memory I will follow the kb suggestions. Crossing
my fingers that I find the problem soon. Thanks for your help!!
"Grumps" <grumpsnothere@hotmail.com> wrote in message
news:3tiudiFsprrbU1@individual.net...
| Quote: | 99windstar wrote:
"Pen" <pen34usnospam@hotmailnospam.com> wrote in message
news:3NmdnXVKNtd3Q-7enZ2dnUVZ_v6dnZ2d@comcast.com...
"99windstar" <nikkiekoalastop@verizon.net> wrote in message
news:T9Qcf.7206$vC6.2141@trnddc05...
I have a Dell 8100 P4 1.7 with 256MB PC800 RDRAM that has been
running fine.
I usually leave it running 24/7... today I went to use the computer
and I had the windows black screen you get when Windows wasn't shut
down properly (I didn't shut windows down) with the option to start
in safe mode. I select to start windows using the last known
settings. As it was starting to go to windows a blue screen flashed
(too fast to see what it said) than went back to the Windows black
screen with the safe mode options. I can get into Windows in safe
mode but I don't have a clue what to look for as my problem. I
suspect that the blue screen that flashes up when I don't go into
safe mode (I don't see the blue screen when I select safe mode)
gives some clue as to what is wrong but it comes and goes too fast
to read anything. How do I troubleshoot in safe mode? What are some
logical culprits? Memory? Drives? I am a novice at this. I have
just done basic things with my systems but don't know where to
start to troubleshoot this. BTW I did try system restore but still
have the problem. Any ideas?? Thanks!!!!!!
Start in safe mode and disable Auto Restart on Error.
Right click MyComputer select properties/advanced
Under Startup and Recivery click Settings
Under System Failure uncheck Automatically Restart
Now you see the error message
Thanks that let me see the error. The error I got was
"A problem has been detected and windows has been shut down to prevent
damage.
BAD_POOL_CALLER
Google for this phrase, select the first Microsoft link. Does that give
any
clues?
|
|
|
| Back to top |
|
|
Aratzio
Guest
|
| Posted:
Sun Nov 13, 2005 1:37 am Post subject:
Re: Please don't hate SONY for their one mistake with DRM pr |
|
|
On Sat, 12 Nov 2005 18:54:50 GMT, kony <spam@spam.com> got double
secret probation because:
| Quote: | On Sat, 12 Nov 2005 08:41:44 -0800, Aratzio
a6ahlyv02@sneakemail.com> wrote:
Does Sony actually design & build the burners? Or is it just some
chinese plant rebadging their product with the sony name?
So far they've been tacking their name onto other major
brand drives like Liteon's. They have no design, build or
firmware differences beyond the manufacturer ID string and
the faceplate with the Sony name on it.
|
Which then brings up this:
Unlikely a completly seperate consumer products hardware division of
Sony will be having much to do with DRM, since that would affect that
division's financial health. People need to quit extrapolating that
the Sony that makes CDs and the Sony that sells CD burners are related
by anything other than a common top level management. This is driven
solely by the Sony music division and it would be suicide for the
Consumer Products (probably is for music, we shall see).
--
Pierre Salinger Hook, Line & Sinker - May, 2005
Hammer of Thor - July, 2005
David Formosa (aka ? the Platypus) on 10-22-2005
Message-Id: <slrndlk3ae.fc2.dformosa@dformosa.zeta.org.au>
"But it is not isolated AUK has a massive impact the rest of usenet."
http://www.tweaknet.info/aratzio.html |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in