| Author |
Message |
Raphael Goubet
Guest
|
 Posted:
Fri Nov 04, 2005 4:38 pm Post subject:
DVD Burning Failure with Nero |
|
|
Hi,
I just installed a DVD writer, and I can't write DVD's with Nero
6.6.0.16. I get an "Invalid field in command" error at the beginning
of the writing process, although the simulation succeeded. However, it
works fine with Pinnacle InstantDisc, which was supplied with the
device.
The only possible problem I may think of is that, when I replaced my
old CD writer provided with my PC, with my new DVD writer, I noticed
that both optical devices (the other being the Compaq DVD player) were
both on "CS". So I installed the DVD writer the same way, instead of
one drive in MA and the other in SL.
Would that be the cause of the failure in Nero?
Below is the Nero log.
Thanks in advance.
Raph
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1
TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Compaq DVD-ROM SD-M1612>Version: 1C10 - HA 1
TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0
ID 0 DMA: On
CdRomPeripheral : Compaq DVD-ROM SD-M1612 atapi Port 1
ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1
ID 1 DMA: On
=== CDRom-Device-Map ===
Compaq DVD-ROM SD-M1612 D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490900kB)
Free physical memory: 118MB (121848kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2005
ISO compilation
23:07:46 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:07:46 #2 Text 0 File Reader.cpp, Line 127
Reader running
23:07:46 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
23:07:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
23:07:47 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
23:07:47 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45,
4489MB)
Last address to be written: 2223199 (494:02.49,
4342MB)
23:07:47 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
23:07:47 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
23:07:47 #9 Text 0 File DlgWaitCD.cpp, Line 448
| Quote: | >>> Protocol of DlgWaitCD activities:
========================================= |
23:07:47 #10 Text 0 File ThreadedTransferInterface.cpp, Line
838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223200 (2223200) =
#2223200/494:2.50
relocatable, disc pos for caching/writing not required/
required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
length 2223200 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
23:07:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line
1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in
CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
0 4553113600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223200 | lead-out | 1 | 0x41 | 0x00
23:07:47 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
23:07:47 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
23:07:47 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
23:07:47 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)
23:07:47 #16 Text 0 File ThreadedTransferInterface.cpp, Line
2654
Verifying disc position of item 0 (relocatable, disc pos, no
patch infos, orig at #0): write at #0
23:07:47 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
23:07:47 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
23:07:47 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
23:07:47 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part
Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path
(PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74
um/track
Starting Physical Sector Number of Data Area: 30000 h
(DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN:
FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
.................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
.................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
.................
23:07:58 #21 Text 0 File Cdrdrv.cpp, Line 1286
23:07:58.109 - TSSTcorp CD/DVDW TS-H552U\H1 T1 : Queue again
later
23:15:24 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA
2223200 (21EC60h), lenght 0 blocks
23:15:24 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:15:24 #24 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2223199
23:15:38 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)
23:15:39 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
23:15:39 #27 Text 0 File ThreadedTransferInterface.cpp, Line
2654
Verifying disc position of item 0 (relocatable, disc pos, no
patch infos, orig at #0): write at #0
23:15:39 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line
1741
Invalid field in command
23:15:39 #29 TRANSFER -35 File ThreadedTransferInterface.cpp,
Line 1741
Invalid track info
23:15:39 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a
(Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001
23:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180
(xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004
22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
|
| Back to top |
|
 |
Mike Fields
Guest
|
| Posted:
Sat Nov 05, 2005 6:02 am Post subject:
Re: DVD Burning Failure with Nero |
|
|
"Raphael Goubet" <rgoubet@yahoo.fr> wrote in message
news:15emm114b3eonqlga1u8ano3g26o94vqfm@4ax.com...
| Quote: | Hi,
I just installed a DVD writer, and I can't write DVD's with Nero
6.6.0.16. I get an "Invalid field in command" error at the beginning
of the writing process, although the simulation succeeded. However, it
works fine with Pinnacle InstantDisc, which was supplied with the
device.
The only possible problem I may think of is that, when I replaced my
old CD writer provided with my PC, with my new DVD writer, I noticed
that both optical devices (the other being the Compaq DVD player) were
both on "CS". So I installed the DVD writer the same way, instead of
one drive in MA and the other in SL.
Would that be the cause of the failure in Nero?
Below is the Nero log.
Thanks in advance.
Raph
|
That would not have been an OEM version of Nero that was keyed
to that CD writer would it ??? I know there are versions out there
that come with the CD/DVD writer that will only work with that model.
mikey |
|
| Back to top |
|
|
smh
Guest
|
| Posted:
Sat Nov 05, 2005 6:45 am Post subject:
Re: DVD Burning Failure with Nero |
|
|
.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/6eldj
(No Mikey S-lickers have been able to prove ANY of the above is a LIBEL)
( )
( -- despite Mikey claimed to have proof of misquotes !! )
'
Raphael Goubet wrote:
| Quote: |
I just installed a DVD writer, and I can't write DVD's with Nero
6.6.0.16. I get an "Invalid field in command" error at the beginning
of the writing process, although the simulation succeeded. However, it
works fine with Pinnacle InstantDisc, which was supplied with the
device.
The only possible problem I may think of is that, when I replaced my
old CD writer provided with my PC, with my new DVD writer, I noticed
that both optical devices (the other being the Compaq DVD player) were
both on "CS". So I installed the DVD writer the same way, instead of
one drive in MA and the other in SL.
Would that be the cause of the failure in Nero?
|
No.
| Quote: | Below is the Nero log.
|
Your DVD-ROM is not on DMA. Go into the BIOS and set to ON.
You must have snipped out some log before the "Invalid field in command"
in #28, like SCSI_ERR, KEY_MEDIUM_ERROR? Could you post the complete
log for #26 -- #28?
| Quote: | -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1
TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Compaq DVD-ROM SD-M1612>Version: 1C10 - HA 1
TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0
ID 0 DMA: On
CdRomPeripheral : Compaq DVD-ROM SD-M1612 atapi Port 1
ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1
ID 1 DMA: On
=== CDRom-Device-Map ===
Compaq DVD-ROM SD-M1612 D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490900kB)
Free physical memory: 118MB (121848kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2005
ISO compilation
23:07:46 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:07:46 #2 Text 0 File Reader.cpp, Line 127
Reader running
23:07:46 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
23:07:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
23:07:47 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
23:07:47 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45,
4489MB)
Last address to be written: 2223199 (494:02.49,
4342MB)
23:07:47 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
23:07:47 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
23:07:47 #9 Text 0 File DlgWaitCD.cpp, Line 448
Protocol of DlgWaitCD activities:
=========================================
23:07:47 #10 Text 0 File ThreadedTransferInterface.cpp, Line
838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223200 (2223200) =
#2223200/494:2.50
relocatable, disc pos for caching/writing not required/
required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,
length 2223200 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
23:07:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line
1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in
CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
0 4553113600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223200 | lead-out | 1 | 0x41 | 0x00
23:07:47 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
23:07:47 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
23:07:47 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
23:07:47 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)
23:07:47 #16 Text 0 File ThreadedTransferInterface.cpp, Line
2654
Verifying disc position of item 0 (relocatable, disc pos, no
patch infos, orig at #0): write at #0
23:07:47 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
23:07:47 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
23:07:47 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
23:07:47 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part
Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path
(PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74
um/track
Starting Physical Sector Number of Data Area: 30000 h
(DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN:
FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
23:07:58 #21 Text 0 File Cdrdrv.cpp, Line 1286
23:07:58.109 - TSSTcorp CD/DVDW TS-H552U\H1 T1 : Queue again
later
23:15:24 #22 Text 0 File WriterStatus.cpp, Line 116
TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA
2223200 (21EC60h), lenght 0 blocks
23:15:24 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:15:24 #24 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2223199
23:15:38 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)
23:15:39 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
23:15:39 #27 Text 0 File ThreadedTransferInterface.cpp, Line
2654
Verifying disc position of item 0 (relocatable, disc pos, no
patch infos, orig at #0): write at #0
23:15:39 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line
1741
Invalid field in command
23:15:39 #29 TRANSFER -35 File ThreadedTransferInterface.cpp,
Line 1741
Invalid track info
23:15:39 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a
(Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001
23:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180
(xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004
22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
|
|
| Back to top |
|
|
Raphael Goubet
Guest
|
| Posted:
Sat Nov 05, 2005 6:35 pm Post subject:
Re: DVD Burning Failure with Nero |
|
|
On Fri, 04 Nov 2005 17:45:30 -0700, smh <smhong@mindspring.com> wrote:
| Quote: | Would that be the cause of the failure in Nero?
No.
|
I figured. Actually, I changed them to MA and SL, and it didn't change
a thing.
| Quote: | Below is the Nero log.
Your DVD-ROM is not on DMA. Go into the BIOS and set to ON.
|
OK. Does it need to be done with both drives?
| Quote: | You must have snipped out some log before the "Invalid field in command"
in #28, like SCSI_ERR, KEY_MEDIUM_ERROR? Could you post the complete
log for #26 -- #28?
|
No, I didn't make any change to the log. I also thought the the error
message was pretty short...
The strangest thing is that Nero can burn CD's (but not DVD-R's), and
that other burning softwares write DVD's correctly.
Raph |
|
| Back to top |
|
|
Raphael Goubet
Guest
|
| Posted:
Sat Nov 05, 2005 6:36 pm Post subject:
Re: DVD Burning Failure with Nero |
|
|
On Fri, 4 Nov 2005 16:02:35 -0800, "Mike Fields"
| Quote: | That would not have been an OEM version of Nero that was keyed
to that CD writer would it ??? I know there are versions out there
that come with the CD/DVD writer that will only work with that model.
|
No, I bought it separately.
Raph |
|
| Back to top |
|
|
smh
Guest
|
| Posted:
Sun Nov 06, 2005 12:32 am Post subject:
Re: DVD Burning Failure with Nero |
|
|
.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/6eldj
(No Mikey S-lickers have been able to prove ANY of the above is a LIBEL)
( )
( -- despite Mikey claimed to have proof of misquotes !! )
'
Raphael Goubet wrote:
| Quote: | smh wrote:
Would that be the cause of the failure in Nero?
No.
I figured. Actually, I changed them to MA and SL, and it didn't change
a thing.
Below is the Nero log.
Your DVD-ROM is not on DMA. Go into the BIOS and set to ON.
OK. Does it need to be done with both drives?
|
Check both drives when you are in the BIOS.
| Quote: | You must have snipped out some log before the "Invalid field in command"
in #28, like SCSI_ERR, KEY_MEDIUM_ERROR? Could you post the complete
log for #26 -- #28?
No, I didn't make any change to the log. I also thought the the error
message was pretty short...
The strangest thing is that Nero can burn CD's (but not DVD-R's), and
that other burning softwares write DVD's correctly.
|
Try uninstall/reinstall Nero. |
|
| Back to top |
|
|
Spamless
Guest
|
| Posted:
Sun Nov 06, 2005 9:05 pm Post subject:
Re: DVD Burning Failure with Nero |
|
|
On 2005-11-04, Raphael Goubet <rgoubet@yahoo.fr> wrote:
| Quote: | Hi,
I just installed a DVD writer, and I can't write DVD's with Nero
6.6.0.16. I get an "Invalid field in command" error at the beginning
of the writing process, although the simulation succeeded. However, it
works fine with Pinnacle InstantDisc, which was supplied with the
device.
Burning mode : DAO
|
Did you try Track at Once? |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in