| Author |
Message |
Phil Hellmuth
Guest
|
 Posted:
Mon Oct 31, 2005 9:36 pm Post subject:
Slave drive no longer appears in windows explorer |
|
|
I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can
do to verify the drive is OK and to regain access to it?
Thanks in advance. |
|
| Back to top |
|
 |
John McGaw
Guest
|
| Posted:
Tue Nov 01, 2005 3:08 am Post subject:
Re: Slave drive no longer appears in windows explorer |
|
|
Phil Hellmuth wrote:
| Quote: | I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can
do to verify the drive is OK and to regain access to it?
Thanks in advance.
|
Does the BIOS "see" it while the computer is booting? If the system has
the display of such items disabled you will need to change the BIOS
settings to allow them to show. If the BIOS doesn't know it is there
then you might be the proud owner of a dead drive. Or it might be
something as simple as a loose cable. It might also be worthwhile to try
the drive on another computer if one is handy.
--
John McGaw
[Knoxville, TN, USA]
http://johnmcgaw.com |
|
| Back to top |
|
|
Dave
Guest
|
| Posted:
Tue Nov 01, 2005 3:47 pm Post subject:
Re: Slave drive no longer appears in windows explorer |
|
|
"Phil Hellmuth" <billort@pacbell.net> wrote in message
news:pSq9f.7786$q%.419@newssvr12.news.prodigy.com...
| Quote: | I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can do
to verify the drive is OK and to regain access to it?
Thanks in advance.
|
You could try booting from a Knoppix cd (or similar Linux 'live' cd) and see
if the drive is visible from that. (is the drive formatted Fat32 or ntfs?). |
|
| Back to top |
|
|
Guest
|
| Posted:
Tue Nov 01, 2005 10:52 pm Post subject:
Re: Slave drive no longer appears in windows explorer |
|
|
John McGaw a écrit :
| Quote: | Phil Hellmuth wrote:
I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can
do to verify the drive is OK and to regain access to it?
Thanks in advance.
Does the BIOS "see" it while the computer is booting? If the system has
the display of such items disabled you will need to change the BIOS
settings to allow them to show. If the BIOS doesn't know it is there
then you might be the proud owner of a dead drive. Or it might be
something as simple as a loose cable. It might also be worthwhile to try
the drive on another computer if one is handy.
|
I have a similar problem to Phil Hellmuth's one. But there are two
cases:
- in one case out of three the BIOS sees the drive and then the
computer hangs
- in the two cases out of three the BIOS does not see it and then the
computer works.
What do you you mean by "dead drive" - does it imply that data can't be
recovered? |
|
| Back to top |
|
|
John McGaw
Guest
|
| Posted:
Wed Nov 02, 2005 5:45 am Post subject:
Re: Slave drive no longer appears in windows explorer |
|
|
dudek4ever@liverpoolfc.net wrote:
| Quote: | John McGaw a écrit :
Phil Hellmuth wrote:
I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can
do to verify the drive is OK and to regain access to it?
Thanks in advance.
Does the BIOS "see" it while the computer is booting? If the system has
the display of such items disabled you will need to change the BIOS
settings to allow them to show. If the BIOS doesn't know it is there
then you might be the proud owner of a dead drive. Or it might be
something as simple as a loose cable. It might also be worthwhile to try
the drive on another computer if one is handy.
I have a similar problem to Phil Hellmuth's one. But there are two
cases:
- in one case out of three the BIOS sees the drive and then the
computer hangs
- in the two cases out of three the BIOS does not see it and then the
computer works.
What do you you mean by "dead drive" - does it imply that data can't be
recovered?
|
If enough money and time are spent then almost any data can be recovered
but most people don't want to spend the cost of a new computer (or two)
to get back trivial things. On the other hand companies and governmental
agencies often are willing so the recovery companies stay in business.
In the case of a drive that sometimes starts properly and sometimes
doesn't I'd try it in a different system with a really hefty power
supply -- this will sometimes allow a drive to spin up properly. But if
it did start I'd copy everything that might be of possible use from it
and then destroy the old drive.
This sort of problem used to be more common in the days when drives took
massive spikes of current to spin them up. In fact big (5.25" full
height) SCSI drives were made with delay jumpers that could be set so
that every drive in the system started at a slightly different time
because more than a couple trying at the same time would bring
everything to a halt. Sometimes when newer-technology drives get feeble
and if they are connected to a weak PS the same thing can happen and the
drive doesn't spin up in time for the computer to recognize it.
Remember that it isn't a matter of _if_ your hard drive will fail -- it
is a matter of _when_. Even if the drive has been operating perfectly
for years there is no way to guarantee that it will be operating a
minute from now. Backups are the way to go if there is anything of value
on your drives.
--
John McGaw
[Knoxville, TN, USA]
http://johnmcgaw.com |
|
| Back to top |
|
|
Guest
|
| Posted:
Wed Nov 02, 2005 10:45 pm Post subject:
Re: Slave drive no longer appears in windows explorer |
|
|
John McGaw a écrit :
| Quote: | dudek4ever@liverpoolfc.net wrote:
John McGaw a écrit :
Phil Hellmuth wrote:
I have a slave hard drive where I save various files. For the last few
days, I can no longer see the drive in Windows Explorer (nor anywhere
else). The drive was low on space, so it's possible I may have tried to
save a file that exceeded the available space. Is there anything I can
do to verify the drive is OK and to regain access to it?
Thanks in advance.
Does the BIOS "see" it while the computer is booting? If the system has
the display of such items disabled you will need to change the BIOS
settings to allow them to show. If the BIOS doesn't know it is there
then you might be the proud owner of a dead drive. Or it might be
something as simple as a loose cable. It might also be worthwhile to try
the drive on another computer if one is handy.
I have a similar problem to Phil Hellmuth's one. But there are two
cases:
- in one case out of three the BIOS sees the drive and then the
computer hangs
- in the two cases out of three the BIOS does not see it and then the
computer works.
What do you you mean by "dead drive" - does it imply that data can't be
recovered?
If enough money and time are spent then almost any data can be recovered
but most people don't want to spend the cost of a new computer (or two)
to get back trivial things. On the other hand companies and governmental
agencies often are willing so the recovery companies stay in business.
In the case of a drive that sometimes starts properly and sometimes
doesn't I'd try it in a different system with a really hefty power
supply -- this will sometimes allow a drive to spin up properly. But if
it did start I'd copy everything that might be of possible use from it
and then destroy the old drive.
This sort of problem used to be more common in the days when drives took
massive spikes of current to spin them up. In fact big (5.25" full
height) SCSI drives were made with delay jumpers that could be set so
that every drive in the system started at a slightly different time
because more than a couple trying at the same time would bring
everything to a halt. Sometimes when newer-technology drives get feeble
and if they are connected to a weak PS the same thing can happen and the
drive doesn't spin up in time for the computer to recognize it.
Remember that it isn't a matter of _if_ your hard drive will fail -- it
is a matter of _when_. Even if the drive has been operating perfectly
for years there is no way to guarantee that it will be operating a
minute from now. Backups are the way to go if there is anything of value
on your drives.
|
I checked some firms that are specialized in recovering data from
physically damaged drives and I'm not surprised that only companies and
governmental agencies can afford to do that! |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in