Erik Dunder
Guest
|
 Posted:
Fri Nov 05, 2004 11:25 pm Post subject:
Adaptec 2130S not finding raid on boot |
|
|
Card: Adaptec 2130S
OS: Linux Slackware
Kernel: 2.4.26
Driver: aacraid 1.1-5(from adaptec cdrom)
The problem is that after i built the raid-1 volume using 2 disk's
from CLI and i fdisk/mkfs the raid-1 volume(raid1 = /dev/sda) i
reboot.
The raidvolume isnt "online" in the boot, using the CLI i can open
controller and see that volume (container "UnMap'd").
Using the CLI and issuing lets say "container clear" the raid-1 volume
will showup as /dev/sda again..
This is the relevant info from dmesg during boot:
=========================
Red Hat/Adaptec aacraid driver (1.1-5[2359])
PCI: Found IRQ 5 for device 04:01.0
PCI: Sharing IRQ 5 with 00:02.0
PCI: Sharing IRQ 5 with 00:03.0
PCI: Sharing IRQ 5 with 00:04.0
PCI: Sharing IRQ 5 with 00:06.0
PCI: Sharing IRQ 5 with 00:1d.0
PCI: Sharing IRQ 5 with 00:1d.3
AAC0: kernel 4.2-0 build 7322
AAC0: monitor 4.2-0 build 7322
AAC0: bios 4.2-0 build 7322
AAC0: serial 26312c
AAC0: Non-DASD support enabled
=========================
What am im missing in the boot?!?! |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in
