Adaptec error messages until mounting a device
PC Hardware Forum Index PC Hardware
Dicussion of PC hardware and peripherals
 
 FAQFAQ   MemberlistMemberlist    RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web hwtalk.net
Adaptec error messages until mounting a device

 
Post new topic   Reply to topic    PC Hardware Forum Index -> SCSI
Author Message
Thomas Wildgruber
Guest
Posted: Sat Oct 09, 2004 10:32 pm    Post subject: Adaptec error messages until mounting a device Reply with quote
Hi NG,

during mounting of a scsi device at systemstart, the system hangs a very
long time. I found a lot of entries about the second channel of a dual
channel Adaptec 39320A scsi card.

After systemstart the connected RaidSubSystem is namley functional but i am
awaiting maybe more troubles when there are high I/O operations.

Does anyone undestand what the message means? Can anyone help me to fix
this problem?

System: RedHat 9 (2.4.x) Intel

/var/log/dmesg

-------------schnipp------------
(B2,I2,P0) -> 25
PCI->APIC IRQ transform: (B3,I9,P0) -> 16
PCI->APIC IRQ transform: (B3,I10,P0) -> 19
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 402k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.6
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs

scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.6
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs

blk: queue f7c7bc18, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
(scsi1:A:1): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
Vendor: HITACHI Model: HUS157336EL3800 Rev: A5A5
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7ba18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HITACHI Model: HUS157336EL3800 Rev: A5A5
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7b618, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
Vendor: DAS-315S Model: Volume Set # 00 Rev: R001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7b818, I/O limit 4095Mb (mask 0xffffffff)
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sda: 72205440 512-byte hdwr sectors (36969 MB)
Partition check:
sda: sda1 sda2 sda3
SCSI device sdb: 72205440 512-byte hdwr sectors (36969 MB)
sdb: sdb1
SCSI device sdc: 3921870848 512-byte hdwr sectors (2007998 MB)
sdc: sdc1
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

blk: queue f7c00c18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: M4 DATA Model: MagFile Rev: 3.07
Type: Medium Changer ANSI SCSI revision: 02
blk: queue f7c00a18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP Model: Ultrium 2-SCSI Rev: F45Z
Type: Sequential-Access ANSI SCSI revision: 03
blk: queue f7c00818, I/O limit 4095Mb (mask 0xffffffff)
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 156k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Adding Swap: 2040244k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x7 Mode 0x33

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 79 qinfifonext = 79
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 0 a7
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x22 Mode 0x33

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x34]:(P_DATAOUT_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 79 qinfifonext = 79
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 0 a7
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x35 Mode 0x11

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 104 qinfifonext = 104
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x4, SCB_NEXT == 0x3, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 c0 8d
STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x3b Mode 0x22

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x34]:(P_DATAOUT_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 104 qinfifonext = 104
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x3, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 3 1 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi1:A:1:0): Unexpected busfree in Message-out phase, 1 SCBs
aborted, PRGMCNT == 0x1ae
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x1ac Mode 0x33

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0xa0]:(P_MESGOUT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x40]:(NO_CDB_SENT)
SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 105 qinfifonext = 105
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 3 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x107, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 1 5f
STACK: 0x11b 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0xe0]:(P_MESGIN) SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0xd1]:(DTERR|PARITYERR|HIPERR|HIZERO)
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x1ad Mode 0x11

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI)
SCSIPHASE[0x2]:(DATA_IN_PHASE)
SCSIBUS[0x0] LASTPHASE[0xe0]:(P_MESGIN) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x2]:(SPIORDY)
SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0]
SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x88]:(HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x4]:(DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 1 5f
STACK: 0xd7 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0x60]:(P_DATAIN_DT)
SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0x11]:(DTERR|PARITYERR)
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x35 Mode 0x11

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x4]:(SCSIPERR) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0x11]:(DTERR|PARITYERR)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0x60]:(P_DATAIN_DT)
SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0x11]:(DTERR|PARITYERR)
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x35 Mode 0x11

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x3b Mode 0x22

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x3, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 3 1 0 0 0 0
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
Quote:
Dump Card State Begins
scsi1: Dumping Card State at program address 0x35 Mode 0x11

Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]

Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1

SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,33), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
Attached scsi tape st0 at scsi2, channel 0, id 1, lun 0
-------------schnapp------------

best regards

Bye Tom
--
Was wir von der Bush Administration zu halten haben,
wissen wir ja schon. Was wir vom amerikanischen Volk
zu halten haben, erfahren wir bei den kommenden Wahlen.
(tw 09'04)
Back to top
 
Post new topic   Reply to topic    PC Hardware Forum Index -> SCSI All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Electronics VoIP DSP
New Topics php BB